Description
This 20×4 LCD Controller is the perfect add-on for your RepRap Printer.
This simple addition gives you the following features:
- a live status display so you can check temperatures and speeds at a glance.
- a rotary knob and push button that is used for navigating the menus and adjusting parameters, even while printing.
- an SD-Card reader that can store your G-code programs allowing you to print without your PC connected.
- a buzzer for audio feedback
- a 20 Character x 4 Line LCD display.
You can easily connect it to your RAMPS, Teensylu or megatronics board using the appropriate adapter. Support for all features is built-in to all the mainstream firmwares already.
After connecting this panel to your controller and configuring the controller firmware you can print without your pc, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done using the rotary encoder on the Smart Controller. Print your 3D designs without a PC, just save the g-code program on the SD card.
For controller which already have an SD-card you should continue to use the SD-card slot on the controller.
The reprap.org page with information on how to connect it and set up your firmware to use it is here:
http://www.reprap.org/wiki/RepRapDiscount_Smart_Controller