Description
Nema 17 hybrid stepping motor suitable for many 3D printer Reprap machines
2-phase with 4-wire bipolar windings.
General Specification:
Shaft Diameter: 5mm with flat face
Step Angle: 1.8° (200 step/rev)
Motor Length: 48 mm
Rated Current: 1.8 Amps per phase
Phase Resistance: 1.8 ohms
Phase Inductance: 3.2 mH
Holding Torque: 74 oz-in / 52 N.cm / 5.3 kg.cm
Detent Torque: 2.6 N.cm
Rotor Inertia:68 g.cm2
Weight: 370g
Wiring:
Red: A+
Green:A-
Yellow:B+
Blue:B-
Step angle accuracy: ±5%(full step,no load)
Resistance accuracy: ±10%
Inductance accuracy: ±20%
Temperature rise: 80°C Max(rated current,2 phase on)
Ambient temperature: -20° ~ +50°C
Insulation resistance:100MΩ Min,500VDC
Insultion Strength: 500VAC for one minute
